How to Fill, Ignite, and Maintain Your Dunhill Turbo Lighter

What You’ll Need:

High-purity butane gas (Dunhill brand recommended)

The brass refill adaptor (included in the retail box)

A clean, stable surface

Optional: soft chamois cloth for polishing

How to Refill Your Turbo Lighter

1. Ensure safety: Make sure the lighter is cool and the safety lock is engaged. Do not refill near open flame or heat.

2. Attach the adaptor: Place the brass adaptor over the nozzle of your butane refill canister.

3. Invert the lighter: Turn the lighter upside down to access the refill valve.

4. Insert and fill: Firmly press the adaptor nozzle into the valve and hold for about 5 seconds. You may hear a brief hiss as the chamber fills.

5. Rest the lighter: After filling, let the lighter rest for at least 10 minutes—ideally 24 hours—before first use. This allows the fuel to stabilize and return to ambient temperature.

Note: Refill only in well-ventilated areas. If your lighter has been unused for 7 days or more, refilling may be required before it lights reliably.

How to Ignite the Turbo Flame

1. Unlock the safety catch by aligning the flame symbol with the dot (see figure 5a in your manual).

2. Flip open the extinguisher cap to expose the burner.

3. Depress the ignition lever to ignite. The flame will activate instantly with a strong jet.

4. Release the lever to extinguish the flame. Always close the cap and re-engage the safety lock after use.

Important: In bright light, the Turbo flame may appear invisible. The flame tip is especially hard to see—use caution.

Ongoing Maintenance and Care

• Use only high-purity butane. Lower-quality fuel may clog or damage internal components.

• Clean the nozzle and air vent regularly to prevent dust buildup, which can affect performance.

• Avoid prolonged use: Do not burn for more than 10 seconds continuously to avoid overheating.

• Polish the exterior with a soft chamois cloth to maintain the finish. Take extra care with lacquer or highly polished surfaces to avoid scratching.

• Store in its original box when not in use to protect the finish and mechanism.

• Remove the flint if the lighter will be unused for extended periods to avoid residue from flint degradation.

Troubleshooting Tips

• Flame won’t ignite? Ensure the fuel tank is full, the safety catch is unlocked, and the air vent is clear.

• Weak or inconsistent flame? You may need to refill, or the nozzle may be clogged. Always use Dunhill-branded fuel for best performance.

• Lighter gets hot? This is normal after continuous use. Let it cool down completely before handling again.

Don’t hesitate to call us toll-free at +1 (800) 495-3201. Our normal business hours are Monday thru Friday from 9:00 am to 5:00 pm CST. If you call and we do not answer, please either send an email to Customerservice@kirbyallison.com or leave a message.